Pages

August 30, 2010

The Wonder of Spray Paint

My cousin Erika posted this great idea on her Facebook page:
She took Rustoleum Oil Rubbed Bronze spray paint to the brass knobs in her house. GREAT IDEA! I am already buzzing with different applications to use it on…hardware, knobs, pulls, light fixtures, lamps, frames… and how about those chrome builders grade bathroom fixtures ?… the list could go on and on…

I think I’ll go purchase some today to add to my arsenal of spray paint. Thank you Erika for the inspiration!

94 comments:

  1. Anonymous12:56 PM

    Did she take the hardware off before painting?

    ReplyDelete
    Replies
    1. Anonymous2:16 AM

      Hi I went to home depot but they had lots of colors can u tell me the color u used in the picture .?

      Delete
    2. Anonymous8:48 AM

      Isn't the Rubbed Bronze the color?

      Delete
  2. Anonymous1:48 PM

    Yes I did:)Best thing is to let them COMPLETELY dry for a full day or 2. I love the drastic change it has made~

    ReplyDelete
    Replies
    1. Anonymous1:34 PM

      Did you do your front door and back door? Couldn't really leave the knobs off of the doors for 2 days

      Delete
  3. Anonymous12:45 AM

    Has the finish worn off? I've thought of doing this but was afraid.

    ReplyDelete
    Replies
    1. Anonymous11:45 AM

      I have done this several times in our home. The finish started to rub off the inside of the kids bathroom door after about 5 years, no problem ... Just sprayed again :-)

      Delete
  4. Anonymous8:14 AM

    I'm also wondering if the finish has worn off.

    ReplyDelete
  5. Anonymous8:17 AM

    I have done this for the hardware on our pantry pocket door-those handles are expensive! It looks great, and is holding up just fine, even in the kitchen. I also did light fixtures that were yucky rusty brass, they look fantastic. Ah spray paint, my new best friend!

    ReplyDelete
  6. Looks Awesome, I Love It !!!

    ReplyDelete
  7. All of the knobs in my house are bright brass. I'm just wondering how to navigate the lock on the bedroom door? I've been reading and contemplating doing this to the shower surround (also bright brass). I, like the others, am wondering how it's held up?

    ReplyDelete
  8. We did ours about 4 years ago. most of them haven't chipped at all. We did our light fixtures, shower trim, all doors, hinges, kitchen cabinet pulls and hinges, towel racks etc. Our pantry door has chipped but that's because we put a child lock on it. Our door to the garage also chipped but i think it's from keys being in hands. Other than that they've held up REALLY well. If I remember correct we used a spray primer too. Take your time and do it right. Also, if you're doing door hinges, number them cause they don't go back on correct unless they're in the exact place. I think i'll pull the worn stuff off this weekend and respray it. Not bad for 4 years!

    ReplyDelete
    Replies
    1. How did you paint your shower trim?

      Delete
  9. Anonymous9:15 AM

    I have also painted all the brass in my house--ceiling fans-dining room lights--showers-hinges-knobs-no more brass!!! I did not take off the hinges--I sprayed the paint in a metal cup and painted the SPRAY PAINT on with a brush--works great!!!!

    ReplyDelete
    Replies
    1. Anonymous12:24 AM

      That's an awesome idea! So easy!

      Delete
    2. Anonymous9:43 PM

      I have bronze colored trim around the ligt fixtures, would it work on that or is it just for shiny brass?

      Delete
  10. Anonymous11:56 PM

    Does this work on faucets? I have wondered about that. I sprayed by cabinet pulls and it is fantastic! It actually gave my cabinets an updated look! yay me!

    ReplyDelete
  11. Anonymous11:50 PM

    Did you put any kind of primer on before, and if you didn't, do you wish you had? Any tips that you learned along the way to help? Thanks!

    ReplyDelete
  12. what a fantastic idea, and thanks for the comments as well...this is going to improve my house so much!!

    ReplyDelete
  13. This is such a great idea! Thank you so much for sharing. They look great!

    ReplyDelete
  14. Love the idea of spraying the paint in a cup and painting it on the hinges and such.

    ReplyDelete
  15. Anonymous6:57 AM

    Do you have to sand everything before spray painting?

    ReplyDelete
  16. Anonymous11:52 PM

    I spray painted all my brass kitchen knobs with the oil bronzed finish to match my new kitchen faucets and they look beautiful. And it was so easy!

    ReplyDelete
  17. Anonymous10:37 PM

    I saw this on Pinterest & had to check it out. Amazing transformation!! Thanks for sharing such a great idea.
    - Julie

    ReplyDelete
  18. how many coats does it take? also, how many door knobs can you get out of one can?
    thanks so much! :)

    ReplyDelete
  19. Anonymous11:39 AM

    I am statrting to this but ran into a problem... the bristles grom my paint brush are coming off into the paint. What type of brush or technique was used to prevent this and streaking?

    ReplyDelete
    Replies
    1. Anonymous12:42 AM

      Its a spray paint..u dont use a brush.

      Delete
    2. Wouldn't a foam brush work? You know the really cheap kind you can get for crafting?

      Delete
    3. Anonymous1:42 AM

      You might consider getting a little bit more expensive brush and just be sure to clean it really well after, or, pull on the bristles before painting to make sure you've removed all the loose ones. :)

      Delete
  20. I am so excited to do this. thanks

    ReplyDelete
  21. Just curious if the knobs turn well after being sprayed. Any issues with functionality?

    ReplyDelete
    Replies
    1. Anonymous11:54 AM

      I'm wondering this too. I did read on another blog that you should leave your key halfway in the lock so the paint doesn't gum up the locking mechanism.

      Delete
  22. I found the metallic oil rubbed bronze...it this the same as you used or do I need to go to Lowe's or Home Depot instead of my local Wal-Mart?

    ReplyDelete
  23. I think I will give it a go...4 years is a long enough amount of time to stall the expensive investment of solid doors and new fixtures!

    If you are painting the hinges you should use a disposable sponge brush, no bristle marks or shedding of the hair!

    ReplyDelete
  24. Anonymous10:08 AM

    I've used this technique on a ceiling fan we found on clearance that was brushed nickel with white frosted glass. Right out of the box I took all the pieces and spray painted them in the oil-rubbed bronze. I also wanted the antique alabaster colored glass, so I took a rag and dabbed on some cream acrylic craft paint, followed by dabbing on some leftover cherry colored gel stain we used on some doors to give more dimension and also some sheen to it. Looks wonderful and no one believes it was a diy!

    ReplyDelete
  25. Anonymous4:29 PM

    I would love to paint the brass on my fireplace door but can't the it (the "surround" off)? Has anyone else done this? Or, do I just spray it while it's attached to the wall?

    ReplyDelete
    Replies
    1. Anonymous7:52 PM

      I have done it and it was so easy! It was on an HGTV show once. Make sure you use the Rust-o-leum spray paint for high-heat application. I think there is a picture of a grill on the front. I turned off the pilot light and let the fireplace cool down. Then I tape-and-papered off the areas I didn't want affected (glass, tiles, wood trim) and sprayed a matte black in long even strokes. I was sure it was going to turn out splotchy, but it turned out perfect! You can't tell at all that it was DIY-ed.

      Delete
    2. Anonymous12:07 AM

      Spray it in the lid and paint it on :)

      Delete
    3. Anonymous3:58 PM

      We did our fire place too! It was do easy and it looks like we bought a new front. We did prime the brass by sanding it first. We also used spray paint for engines do it was heat resistant.

      Delete
    4. Anonymous11:34 PM

      My fireplace surround was brass. I unscrewed it and painted it with heat resistant paint. That was about 7 years ago. needs to be done again as I think the kids scratched it, but worth it. I have also sprayed my kitchen cabinet handles. what a change it made to my kitchen. I didn't sand first but you should wipe down with rubbing alcohol first to degrease. Great idea on the door handles. I will definitely do that. thanks

      Delete
  26. Anonymous11:55 AM

    Do you think it would work on my kitchen faucet and the sink????

    ReplyDelete
  27. Anonymous12:29 AM

    This is such a great idea - did you have to take the locks and hinges off to spray them? I love the idea, but don't want to make extra work for myself!

    ReplyDelete
  28. Anonymous12:10 PM

    Really cool! I used Krylon brand because I couldn't find Rustolium and it works good too. Oh and I used empty toilet paper rolls to prop them on so I could see if I missed a spot!

    ReplyDelete
    Replies
    1. Anonymous1:00 AM

      I used the Krylon brand also.It worked great! I used spray paint lids to hold the knobs up. I painted one one the door and took the rest off, they look better and it was easier to paint.

      Delete
  29. Anonymous10:20 PM

    My current handles on my cupboards are a combination of brass and porcelain. Has anyone tried spray painting something like this?

    ReplyDelete
    Replies
    1. Anonymous11:33 AM

      I have the same kind of handles in my kitchen I just taped the porcelain with painters tape and spray painted the gold with a rustoleum oil rubbed bronze! They came out fantastic and a lot cheaper than buying all new hardware!

      Delete
  30. Anonymous7:10 AM

    Found you thru Pinterest and now I'm a new follower--love your stuff! I'm sitting here thinking what I can update this way!

    I'd love to know how it works on shower doors too, as someone else asked. I anyone has had success, please post details. :-)
    Terri in FL

    ReplyDelete
  31. Anonymous3:56 PM

    in my experience it flakes off in a short amount of time. is there a way to stop that from happening?

    ReplyDelete
  32. Anonymous6:48 PM

    I also used that rustoleum oiled bronze paint on my things. Kitchen pulls and hinges, furniture handles in front room and bedroom, ceiling fans, taping off the tear drops with blue painters tape, brass lamps and statues as well as my drapery rods. Hadn't thought of the water areas like bathroom and kitchen sink tho. any nitches get hit with a paintbrush and spraying the paint in the cap.

    ReplyDelete
  33. There was an annonymous comment a few up asking about brass and porcelain cabinet pulls. I painted mine, worked great. You just have to sand the shine off the porcelain. Here's a link to my blog where I explain all of it: http://www.ljjonescircus.blogspot.com/2011/10/epic-fail-followed-by-successi-think.html

    I love the idea of painting the door knobs and hinges. I started replacing a few...pfew! Way expensive. I think I'll try to pain them. Thanks for the idea.

    ReplyDelete
  34. Anonymous9:03 PM

    I have done this to all of the door handles in my house including ones with locks. I have had no problem with the functionality at all and I love the way they turned out! BUT the door handles we use the most have started to rub off some :(

    I took them all off the doors and poked them through cardboard boxes, even the screws and spray painted it all! And I did use the Rustoelum Brand.

    ReplyDelete
  35. Anonymous12:08 AM

    WILL THIS WORK ON AN OUTDOOR GATE?

    ReplyDelete
  36. I'm fairly certain rustoleum is for indoor/outdoor use. my brother-in-law sprayed his fireplace gate and it's held up great!

    ReplyDelete
  37. Anonymous8:55 AM

    What about bathroom and kitchen sink fixtures?

    ReplyDelete
  38. Anonymous8:47 AM

    I love this and I am so not trying to be a smart@$$ but it looks a tho the knob was put on backwards when u got thru painting it. Just wanna let everyone know that it has to go on the same way or it won't work! Forgive me! I have always noticed the little things...

    ReplyDelete
  39. I did this project a few weeks ago on my bathroom door knob, looks great so far! I'm planning to do the rest of the fixtures in that bathroom as well! Thanks for the inspiration!

    Linked back to you from my blog- http://allgrownup2011.blogspot.com/2012/05/quick-fix-for-mis-matched-door-knobs.html

    ReplyDelete
  40. I have done this for years. The rustoleum brand is perfect and well worth it......I will soon door ceiling fans and chandeliers ...

    ReplyDelete
  41. I have done this for years. The rustoleum brand is perfect and well worth it......I will soon door ceiling fans and chandeliers ...

    ReplyDelete
  42. I have done this for years. The rustoleum brand is perfect and well worth it......I will soon door ceiling fans and chandeliers ...

    ReplyDelete
  43. I have done this for years. The rustoleum brand is perfect and well worth it......I will soon door ceiling fans and chandeliers ...

    ReplyDelete
  44. Anonymous5:40 PM

    I actually used this on a fireplace surround---it was a weird cross between a bronze and a brass and kind of a greenish tint that I didn't really like. We're going to upgrade to a wood-burning stove eventually and the fireplace is damaged and won't ever be used for a real fire (we have an electric log set in there) so I just went ahead and spray painted it. Looks magnifique!!!

    ReplyDelete
  45. Anonymous3:38 AM

    Did u have to take off the old finish first or just paint right over it?

    ReplyDelete
  46. Anonymous7:30 PM

    If you're worried about chipping or flaking off, I brush on Polycrylic by Minwax. It's clear and water based for easy cleanup. I only had to use it on my faucets and shower door. But it definitely protects the paint and really easy to apply with a small foam brush.

    ReplyDelete
    Replies
    1. FINALLY! A response about using it on faucets! Thank you SO much!

      Delete
  47. Anonymous12:01 AM

    If you get a small chip in the paint, fill it in with a Sharpee pen in a matching color. Works like a charm.

    ReplyDelete
  48. I used Hammered Nickel spray paint to update the hardware on my kitchen cabinets in our old house. Worked very well!

    ReplyDelete
    Replies
    1. Nice!.I was wondering about other colors. Seems like the oil rubbed bronze is already getting a little dated looking, but the brushed (or hammered ) nickel might stay current a little longer.

      Delete
  49. Anonymous10:48 PM

    I love this idea....but all of our trim and doors are a lighter oak color. Does anybody know if the darker knobs, handles, etc. would look okay with a lighter colored trim?

    ReplyDelete
  50. Anonymous12:18 PM

    I just used the oil rubbed bronze on a couple inexpensive brass light fixtures that I was trying desperately to replace. Replacements were too cheap looking or incredibly expensive, they don't get touched much and I thought painting them was a good idea, actually it was a wonderful idea. I am more than happy.

    ReplyDelete
  51. Anonymous12:02 PM

    Has anyone tried this in a silver color on gold door knobs was wanting to try but didn't know if there was a silver color

    ReplyDelete
  52. Anonymous3:16 PM

    I'm thinking about painting my door knobs. Do I have to sand them first? They have the gold color just as it looks in the picture from pinterest... Thank you

    ReplyDelete
  53. Anonymous10:06 PM

    I just painted my old 90's brassily light fixtures with ORB spray paint last weekend. What a difference! I actually found the exact chandeliers online in ORB for over $200. My cost: $10 in paint. Love it!!

    ReplyDelete
  54. I have mostly brushed nickel now in the updated parts of the house but I still have gold doorknobs...do you think it would clash to do oil rubbed bronze on the doors and hinges or should I try a brushed nickel spray? Thoughts?

    ReplyDelete
  55. Camille, I think it would look great to do the combo! I did nickel on the wet bar in my basement and ORB on all door knobs and hinges.

    ReplyDelete
  56. I'm from Mexico and I would like to know if I can use another product similar istead of the Oil-Rubbed Bronze. I'm pretty sure I won't find it. Actually I'm not sure if is paint, oil, a type of color paint. Thanks...the result was great!.

    ReplyDelete
  57. Hi Adriana,

    It is a type of color spray paint. Could you buy it online? I know sites such as Amazon.com sell it. To do a similar effect you could brush on black paint and then use a copper/bronze color on top of the black and kind of rub it on. But spraying is easier and takes less time.

    ReplyDelete
  58. Anonymous3:14 PM

    Just finished painting my first door knob and I love it! Did you put any sealer on after the spray paint?

    ReplyDelete
  59. Anonymous8:56 PM

    Does this work on wood? Have a medicine cabinet I would like to change the frame.

    ReplyDelete
  60. Anonymous10:51 PM

    On the chandlers does it need a water bAse top coat? Very interested need some advise for light fixtures

    ReplyDelete
  61. Anonymous9:05 AM

    We are working on doing all of our (24) doors right now. Rather than take down the whole door or try to paint the hinges with a brush we tried to do all of the top hinges at once then put them back before moving on to the middle etc.

    ReplyDelete
  62. Hi I am a profesional painter and I been doing this for years using a variety of brands and metallics. Paint will always stick better to a surface that you have scuffed up a bit - I have found that a green scotch bright pad or steel wool works great. The more human contact the more important it is to do a bit of prep work. When doing a light fixture I just start spraying (no prep), but if I am doing a faucet or door knob I alway give it a quick scuffing to help with the addehesion and durability.
    As far as doing a finale clear coat - it is not necessary or preferable. You should never put a water base clear coat on top of an oil or enamel based paint. Clear coating will usually start to scratch or chip before the paint actually will.
    You also do not want to use spray paint in an enclosed room. Spray paint produces a lot of airborn over spray that will get on everything in the room.

    ReplyDelete
  63. Anonymous1:19 AM

    I painted all of the gold light fixtures in our house that wasn't selling, "looked outdated" according to buyers and our real estate agent thought we purchased new custom lighting fixtures. House sold 2 weeks later!

    ReplyDelete
  64. Anonymous12:46 PM

    My cabinet knobs are REAL oil rubbed bronze. The ones used most have had the "oil" rubbed off down to the brassy bronze. Will this match the original finish?

    ReplyDelete
  65. Anonymous9:24 PM

    I have medium Brown wood trim all thru the house. Do you think the bronze would look ok or could I spray paint them the nickel color? Thoughts?

    ReplyDelete
  66. Anonymous12:25 AM

    I had oil rubbed bronze fixtures in the shower and they needed to be done after getting ruined by bleach. I took them off, cleaned them well and then sprayed. They have lasted for over a year now in the shower.

    ReplyDelete
    Replies
    1. Anonymous11:59 PM

      Been wondering about doing my faucets for over a year now. You gave me what I needed to hear! Thanks for posting!

      Delete
  67. We used brushed nickel spray paint on our bathroom door hinges and knobs over a year ago and they still look fantastic. We are going to do our whole house, it's amazing.

    ReplyDelete
    Replies
    1. Anonymous2:36 AM

      What brand of brushed nickel did you buy and where did you buy it?

      Delete
  68. Anonymous11:25 PM

    All I could find was the metallic oil rubbed bronze...does it look nice or too shiny?

    ReplyDelete
  69. Anonymous9:12 PM

    I did this two days ago. My kitchen has 40 knobs and I still have paint in the can! I love it!!!!!!

    ReplyDelete
  70. Anonymous2:52 PM

    Great info! Thanks! I saw this pic on pinterest and want to do my fireplace frame (currently brass). I plan to tape and paper it off like another commenter mentioned.

    ReplyDelete
  71. Anonymous1:49 PM

    Did you have to sand the metal before applying the primer?

    ReplyDelete
  72. Anonymous1:56 PM

    I used this technique when we were refinishing our kitchen cabinets and it turned out great! I sprayed the handles and hinges on the cabinets and saved hundreds and they are not chipping or scratching. I used a clear coat spray over the top.

    ReplyDelete
  73. Anonymous11:10 PM

    i did this on a bunch of brass pieces.
    Mailbox, wall sconce, door knocker and next will be the door knobs. The finish is awesome, great product!! They look better than new!! thank you for sharing this!

    ReplyDelete